Creissant Faure Door Knob May 23rd, 2018 - 10:39:14
The first thing to do is to go out and get the new door knob pick the one you like even if it is different to the ones you already have around the house. The mechanism in all of them works in much the same way and their fit on the door is standard. You will need a flat and a Phillips screw driver ( the Phillips screw driver is the one that has a round star shaped tip) and maybe a small hammer. The process of changing the door knob is simple and easy to do because all you will be doing is exchanging one for the other.
This is why we are looking for a quality door knob that can fulfill our needs properly. And when it comes to inside door knobs the concerns certainly increase in number as we have to make a proper match with all the other interior parts of our house. Interior rooms are different from exterior ones in both purpose and facility. For example exterior doors are exposed to the outside which makes it essential for them to be an attractive bright color to magnetize others focus. Again they are more often reached for by people from the outside.
If the door opens outwards the flat side should look outwards too if it opens to the inside the flat side should look inwards. Now slip in the cylinder through the door knob hole while holding the opening and closing mechanism pushed in so that it fits into the space provided for it in the door knob cylinder. Find the two large screws and the metal cover that go on the inside and screw it in place. Make sure it is tight but not overly tight. Test this by tuning the outside knob the opening and closing mechanism should retract without resistance.
When door knob operates properly right carefully tightening the screws on your knob and also the latch assembly. At this time install the strike plate located on the door facing simply by being certain that it fits in the slot properly and installing the screws. Gradually examine the door and then make any necessary modifications. Straightforward work saving tip; Be sure you turn the latching mechanism as well as the latch the appropriate direction to begin with you can certainly insert them in backwards and then have to re-do your work.