Paige Migneault Door Knob May 20th, 2018 - 10:44:01
Soon a lock would be added to a door. That made not only a way to keep the door from accidentally opening but also a way to intentionally keep people out. That wasnt enough for some people who could bust through a simple lock so there had to be more substantial locks created. Dead bolts were added to really hold a door shut when the person inside wanted it to stay that way. At one point there were very limited selections if you wanted a door with locks and even more limited selections if you wanted the additional dead bolt lock that matched the door knob.
It takes a while to gape at these shimmering beauties. Antique glass door knobs with their clean cut designs of crystal and cut glass are a sight words cant describe. The attention to detail and intricate patterns shaped into a dream is a pure exhibition of flawless workmanship. Antique glass knobs complement different types of doors and add to the décor of the door. Antique glass door knobs are becoming increasingly popular for the class and degree of sophistication they bring. Individuals are getting their doors customized in accordance with the type of antique glass door knobs.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.
We have to think about the basic things first like the proper matching of replaced knobs with the door design. If we find this satisfactory we can then proceed. Just like the removal process we have to place the latch mechanism first on the door. Keeping the screws loose initially can help here because this would help to adjust the knobs smoothly. We can tighten the screws afterward. After adjusting and tightening all these parts we will have to use them by spinning the knobs to find if it is working properly or not. These steps are the basics for replacing a door knob.