Paige Migneault Door Knob May 20th, 2018 - 10:46:54
The best way to choose which type your door needs would be to measure from the sharp edge of your door to the actual center of your door knob. If you buy a brand new door knob numerous door knob sets are variable that will fit either size door. To remove the current door knob use the appropriate kind of screwdriver and take the two main screws loose altogether. Pull on the knobs coming from each direction and so the knob will come apart on each side. To take out the latch take out the 2 anchoring screws on the door edge and the face plate now the latching mechanism should pull out.
Preston Sandlin is a home inspector and real estate investor in Charlotte NC. He has been performing home inspections and buying real estate in Charlotte NC for over 12 years. He is a member of the North Carolina Home Inspectors Association the Charlotte Regional Realtors Association and the BBB. There is a nostalgic bond between doors and knobs. There are a number of door knobs of different shapes and sizes made for doors. Door knobs made from polished brass and chrome are very popular today but somehow most of them fail to showcase the elegance seen among antique glass door knobs.
So they need to have a proper security system to maintain safety measures of the house. This is why manufacturers design exterior door knobs differently. However inside lever knobs are free from these concerns. When we choose inside door knobs we have to look properly at the rooms condition. This is important because if we want to use the knobs for our bedroom we will have to ensure a locking system which could be unlocked from inside only and in the case of emergence from the outside with a special key. There are privacy door knobs available for this purpose.
If the door opens outwards the flat side should look outwards too if it opens to the inside the flat side should look inwards. Now slip in the cylinder through the door knob hole while holding the opening and closing mechanism pushed in so that it fits into the space provided for it in the door knob cylinder. Find the two large screws and the metal cover that go on the inside and screw it in place. Make sure it is tight but not overly tight. Test this by tuning the outside knob the opening and closing mechanism should retract without resistance.