Paige Migneault Door Knob May 20th, 2018 - 10:42:12
Look at the base of the knob close to the door itself and you will see a small hole with a little separation inside of it. Take a key like piece of metal that is included in the new doorknob set and put it in the small hole prying it open. Pull the door knob out as you pry the hole until it comes out completely. You will have removed the decorative part of the mechanism and the operative part will be exposed. Against the door itself you will see a round piece of metal which is held in place by two large screws remove these screws all the way.
Also a good resistive structure is needed. Deadbolts are used along with exterior door levers. We have to pull out these deadbolts latches if we want to replace the knob. Interior knobs have a basic structure somewhat simpler than an exterior knobs properties so they are simpler to replace. The main screws need to be removed first using a screwdriver. Then the two knobs on each direction will automatically come out. After that faceplate screws on the edges need to be taken out to remove the latching parts. Then the main plate needs to be taken out removing the anchor screws. These are the basic tasks to remove a door knob. Then the question of installing the new door knob arrives.
They also will be getting a lot more wear and tear on an outside door and may not be strong enough to handle it. Its not just door knobs but there are also handles that can replace a door knob to give you door a little different look. The sliding door handles have a more industrial look. If you are creating a home with a modern décor motif these may be just the pieces you are looking for. An added bonus of the door handle door knob varieties is that for some they are easier to open. As many people age they have limited mobility in their hands from arthritis or other muscle reducing ailments. Sometimes grabbing a hold of a normal door knob and turning it is a difficult proposition. But with a sliding door handle its much easier to open a door just push the handle down and the door pops open. Even if they have limited hand mobility these doors can be opened by just leaning on the handle to trigger the mechanism.
The first thing to do is to break open the new door knob and make sure all the necessary parts are there. You will find a list of them on the instruction page. Once you are sure the set is complete it is time to take the old one apart. Open the door and using the Phillips screwdriver remove the two screws holding the door closing mechanism in place. This is the metallic piece that sticks out of the door and is drawn inside the door when the knob is turned. Now take a look at the side of the door that does not have the lock the one that is on the inside side of the door.