Paige Migneault Door Knob May 20th, 2018 - 10:47:48
We just have to have patience in doing our job with concentration. Also you need to consider the type of knobs because knobs are not the same for all types of doors. Exterior doors have different properties than interior ones. Their installation or replacement is quite different as well. To remove exterior knobs we have to pull out some crucial parts like locks and screws. Exterior doors are exposed to the outside which makes them compatible to unwanted handling by strangers. To save our house from this we need to add a locking system on exterior knobs.
The most common styles of door knobs are privacy knobs keyed entry knobs passage knobs commercial knobs and dummy knobs.Privacy knobs can be locked from the inside. These are used as interior door levers for rooms like bathrooms and bedrooms. For major entry areas like front doors and garage doors keyed entry knobs are perfect because of its key mechanism specially created for exterior door hardware. You will see less locking mechanisms on passage knobs as these are not made for security. In the case of dummy knobs only decorative purposes are considered.
Considering this we could easily find out that they wear out over time. Replacement door knobs are also a very important fact in our daily life to maintain a suitable and acceptable condition of living if we want to live in a practical way. This is why we have to know how to properly choose a replacement door knob when needed. We know that replacing knobs is not a difficult task because of a knobs simple operating structure. They are installed comfortably with the use of plain instruments like screwdriver.
Once done you will now see the inside of the wooden door and the part of the doorknob that goes through it. Push the opening and closing mechanism on the front of the door and at the same time pull the remaining piece of the door knob from the outside it will slide out easily leaving a hole that goes through the door. Once this is done take the opening and closing mechanism and slide it out the front of the door too. Now you have to reverse the process place the opening and closing mechanism through the front of the door make sure the flat side of the mechanism looks to the side to which the door opens.