Paige Migneault Door Knob May 20th, 2018 - 10:47:52
The kind of door knob you need depends on whether or not they are an exterior door or an interior door. Exterior door knobs will certainly be required to have a good lock on the door and are required to be weather resistant and a more heavy duty kind door knob than an interior knob set. Any time you replace the outside door knob you are going to have a deadbolt latch which should be replaced at the same time so that you can have matching keys for each of the locks. Interior doors have a practical door knob and are available in two standard general sizes; 2-3/8 inches and also 2-3/4 in.
Now put the screws on the opening and closing mechanisms again do not over tighten them test the door knob again there should be no interference or resistance. The operative mechanism is in place now it is time to finish the decorative part of the installation. Take the decorative plate that covers the mechanism and slip into place until it locks. Before putting in the decorative door knob lock the door and try the key without actually closing the door. The door should lock and unlock without major pressure or resistance.
Replacement door knobs can then be expected to work just as well as the previous ones so you dont need to hire any mechanic to replace your knobs. We easily can do it ourselves. This is one of the most attractive points of knobs which can also bring satisfaction to us by doing the works ourselves. When looking for inside door knobs we have to think that these knobs need to be compatible with the room and appealing enough to hold the appearance of the whole house. Door levers are very important and essential parts of our house which require a lot of attention as we want them to compliment our.
We have to think about the basic things first like the proper matching of replaced knobs with the door design. If we find this satisfactory we can then proceed. Just like the removal process we have to place the latch mechanism first on the door. Keeping the screws loose initially can help here because this would help to adjust the knobs smoothly. We can tighten the screws afterward. After adjusting and tightening all these parts we will have to use them by spinning the knobs to find if it is working properly or not. These steps are the basics for replacing a door knob.