Paige Migneault Door Knob May 20th, 2018 - 10:43:10
If the door opens outwards the flat side should look outwards too if it opens to the inside the flat side should look inwards. Now slip in the cylinder through the door knob hole while holding the opening and closing mechanism pushed in so that it fits into the space provided for it in the door knob cylinder. Find the two large screws and the metal cover that go on the inside and screw it in place. Make sure it is tight but not overly tight. Test this by tuning the outside knob the opening and closing mechanism should retract without resistance.
Look at the base of the knob close to the door itself and you will see a small hole with a little separation inside of it. Take a key like piece of metal that is included in the new doorknob set and put it in the small hole prying it open. Pull the door knob out as you pry the hole until it comes out completely. You will have removed the decorative part of the mechanism and the operative part will be exposed. Against the door itself you will see a round piece of metal which is held in place by two large screws remove these screws all the way.
The entrance porcelain door knobs are fully functional with locks and latches. Privacy and passage sets are used on bathroom and bedroom doors. Porcelain dummy knobs make a perfect addition for your cupboards and closets. Usually porcelain knobs come in a complete set of two pieces. They are available in different sizes. However the standard ones measure 2 ¼ or 2 ½ diameter. Most porcelain door knobs feature a short iron brass or bronze stem. A matching backplate is also provided in some cases. The backplates normally come in five different finishes - satin nickel antique brass polished brass chrome and oil-rubbed bronze. Porcelain door knobs are available in a choice of colors and finishes.
Soon a lock would be added to a door. That made not only a way to keep the door from accidentally opening but also a way to intentionally keep people out. That wasnt enough for some people who could bust through a simple lock so there had to be more substantial locks created. Dead bolts were added to really hold a door shut when the person inside wanted it to stay that way. At one point there were very limited selections if you wanted a door with locks and even more limited selections if you wanted the additional dead bolt lock that matched the door knob.